Dive Leader Knowledge DT12 - The role of the Dive Manager Question Title * 1. Which of the following is a correct statement about the role of the dive manager? The dive manager is overall supervisor on the day of the dive The dive manager should perform all tasks personally The person who books the boats and accommodation automatically becomes the dive manager If the branch has a standard risk assessment for the dive site there is no need for the dive manager to assess risks The dive manager should always appoint a coxswain to drive each branch boat, and should not drive themselves OK Question Title * 2. What is the purpose of a dive manager's checklist? Please select all that apply. It helps confirm that everything is in place before leaving for the dive site It acts as a handout for divers going on the dive trip It is used to direct assistants to whom the dive manager is delegating tasks It supports dive management on the actual dive It contains all the information needed for running the dive OK Question Title * 3. What headings should the dive manager's checklist include? Please select all that apply. Site information items Equipment items needed for the dive List of divers and their qualifications Timetable Local information OK Question Title * 4. Which of the following statements reflects your BSAC training about giving a dive briefing? Please select all that apply. Pictures/drawings are a bad way of describing a dive site Mention any expected currents and their direction relative to the site Always insist on a maximum depth Describe how to locate points of interest State who is diving with who. Always let the divers make their own decisions about whether or not to use an SMB When boat diving, the location of the oxygen and first-aid kit can be pointed out during the skipper/coxswain brief If appropriate, the dive manager should remind divers about marine conservation, wreck protection, and general behaviour issues OK Question Title * 5. Which of the following statements reflects your BSAC training about managing a branch shore or small boat dive? Please select all that apply. Safety is all that matters, so do not worry about timings You must allow plenty of time for briefings and checks so that diving happens on time without compromising safety The Assistant Dive Manager should dive with the Dive Manager The Assistant Dive Manager should take over whilst the Dive Manager is diving When timing is important, divers should be given adequate notice to allow them to be ready to dive in time Recording details about each buddy pair on the dive slate or log can safely be left until all the diving has been completed If the dive plan is sound and the divers have been properly briefed, there is no need to carry out any monitoring whilst diving takes place The Dive Manager and coxwain(s) need to work together closely. It is correct dive site etiquette to ignore other groups on the site. Just do your own thing. You should cooperate with other groups on the site and watch out for their divers. OK Question Title * 6. Which of the following statements reflects your BSAC training about charter boat diving? Please select all that apply. The skipper is in charge of all diving activities and is therefore the dive manager The dive manager is in charge for the day and, having assessed the conditions, should direct the skipper as to where, when and how diving will take place Effective liaison with the skipper is very important Always tell the divers to put their equipment wherever they can find space, as soon as they arrive Stow equipment when and where the skipper directs, preferably with buddy pairs next to one another The dive manager should find out the location of safety equipment, entry and exit procedures, and any house rules and give a safety brief to the divers Skippers are required to give a safety brief to all their customers. OK Question Title * 7. Who has the final say about when it is unsafe to dive? The skipper The dive manager The skipper and/or the dive manager Each diver OK Question Title * 8. Which of the following statements reflects your BSAC training about the dive manager's role after diving? Please select all that apply. Once all the divers are safely aboard, the dive logs have served their purpose, so any gaps can go unfilled, and they can be thrown away Collate all the dive log information and pass the logs to the Diving Officer If you contacted the coastguard at the start of diving, notify them of your safe return Leave washing down and packing of equipment to those who are transporting it Organise people to help with washing down and packing of equipment, if necessary Leave collecting money due from divers until another day Collect money due from divers Report any damage to or problems with branch equipment back to the Boat or Equipment Officer OK Question Title * 9. Which of the following can provide all of these functions: a marked entry/exit point; a clear point or area for the boat to patrol; the shortest possible route to and from the surface/dive site; comfort during ascent/descent for less experienced divers and/or in restricted visibility; security for decompression stops; and a datum point for surface or underwater searches? An SMB A DSMB A pair of transits A shot line The boat's anchor line OK Question Title * 10. What are the advantages of a top-tensioned shot? Please select all that apply. Simple construction Adjusts with rise and fall of tide Provides near vertical line Nothing to go wrong Buoy shows more accurate position of dive site Counterweight can get tangled or stuck May not work in current or wind, or if divers pull on main line OK Question Title * 11. What are the disadvantages of a top-tensioned shot? Please select all that apply. Simple construction Adjusts with rise and fall of tide Provides near vertical line Nothing to go wrong Buoy shows accurate position of dive site Counterweight can get tangled or stuck May not work in current or wind, or if divers pull on main line OK Question Title * 12. A shot line should be made with rope of at least 15mm diameter. Why? So that it is strong enough So that it is visible underwater So that it is comfortable to handle OK Question Title * 13. Which of the following statements about constructing shot lines agrees with your BSAC training? Please select all that apply. The buoy should have 50% more buoyancy than the sum of the weights which it supports The buoy should normally have a buoyancy of at least 50kg A 25kg weight is normally big enough Grapnels are unsuitable for shotting wrecks The counterweight on a top-tensioned shot should be as light as possible A tide buoy can indicate the strength and direction of the current OK Question Title * 14. How should surplus line be dealt with when constructing a shot line? Coil it up near the shot weight Coil it up in mid-water, away from the buoy and the weight Cut it off Coil or bag it close to the buoy, or let it float as a 'trail line' OK Question Title * 15. Which of the following can be used for fixing attachments to the middle of a shotline? Please select all that apply. Karabiner Knotted sheepshank Rolling hitch Prusik knot Chain sennet Coiling OK Question Title * 16. Which of the following statements can be used for shortening a shotline? Please select all that apply. Karabiner Knotted sheepshank Rolling hitch Prusik knot Chain sennet Coiling OK Question Title * 17. Which of the following statements reflects your BSAC training about deploying a shot line? Please select all that apply. Prepare the shot line well before reaching the dive site Prepare the shot line once you have reached the dive site Set the shot line out on deck with the weight underneath everything else Set the shot line out on deck with the weight clear or on top The shot 'deployer' should throw the weight in on command, then feed the line out by hand The shot 'deployer' should throw the weight in on command, then keep clear of the line as it runs out If a tide is running, head into the tide and drop the shot as soon as the site begins to show on the echo sounder If a tide is running, head into the tide, and drop the shot slightly up tide of the site If a tide is running, head into the tide, and drop the shot slightly down tide of the site OK Question Title * 18. What method can be employed on any boat to ease the task of recovering the shot line? Use a winch Use a block and tackle Use the strength of several divers, in 'tug-of-war' format, to heave on the rope Use a lifting bag OK Question Title * 19. What is the difference between controlled recovery and buoyant recovery? Controlled recovery takes longer Controlled recovery requires a lifting bag that will lift a considerably greater amount than the shot weight Buoyant recovery uses a lifting bag that will lift a considerably greater amount than the shot weight OK Question Title * 20. What are you advised to be careful about when recovering the shot after either type of assisted lift? Dropping the weight on your foot Breaking the line Spilling air from the bag prematurely Puncturing the float OK Question Title * 21. Which formula is recommended as a guide to dealing with emergencies? Airway Breathing Circulation Stop Look Listen Act Assess Plan Ready Fire Aim Assess Plan Act OK Question Title * 22. How can you use a weighted SMB to mark a position from the surface? Pull out enough line to reach the bottom, tie a weight to the reel and fasten the SMB to the free end, and chuck the lot overboard. Tie a weight to the end of the line, fasten the buoy to the reel, throw the weight in and let the line run out until it goes slack, then lock the reel and chuck the buoy in. Tie a weight to the reel and tie the lock off (free to rotate), attach the SMB in the normal way, then chuck the lot overboard. OK Question Title * 23. Which actions are appropriate if you have a pair of divers missing? Please select all that apply. Post lookouts Mark their last known position Recall other divers Ask other craft to help by searching up tide and out to sea from their last known position Ask other craft to help by searching down tide from and inshore of their last known position Alert the coastguard OK Question Title * 24. Which actions are appropriate in the event of a casualty with diving related injuries? Please select all that apply. Remove casualty from danger Perform casualty assessment Administer oxygen Monitor casualty Monitor buddy Alert the coastguard OK Question Title * 25. Which actions are appropriate in the event of a disabled boat? Please select all that apply. Summon help from nearby craft Accept any offer of a tow unconditionally Accept an offer of a tow once you know whether the tower intends to claim salvage Deploy an anchor or sea anchor to reduce drift if necessary Alert the coastguard immediately Alert the coastguard if you cannot get sufficient help from nearby craft OK Question Title * 26. Some diving groups use a diver-to-surface signalling system based on different colours and combinations of DSMBs to deal with underwater problems, principally running low on breathing gas for decompression. Which of the following are essential if such a system is to be effective? Please select all that apply. All those involved must understand the signals to be used All those involved in surface support must understand what actions they are to carry out in the event of an emergency signal The necessary equipment such as spare cylinders of decompression gas, ropes, buoys, etc, must be fully rigged and ready for deployment whilst diving is taking place The procedures should be well practiced before hand to ensure familiarity and competence to respond in an emergency OK Question Title * 27. What colours of DSMB are recommended where a diver-to-surface emergency signalling system is used? Red=problemYellow=OKRed+yellow=deco gas needed Red=OKYellow=problemRed+yellow=deco gas needed Red=OKYellow=OKRed+yellow=deco gas needed Red=OKYellow=n/a (do not use yellow alone)Red+yellow=deco gas needed Red=n/a (do not use red alone)Yellow=OKRed+yellow=deco gas needed OK DONE